1-387 1-387 designed for rugged excellence industrial 6-port lite-managed poe ethernet switch ips-2042tx/ips-2042fx series ? ips-2042tx provides 4x10/100base-t(x) p.s.e. and 2x10/100base-t(x) ports ? ips-2042fx series provide 4x10/100base-t(x) p.s.e. and 2x100base-fx single/multi mode fiber ports ? fastest redundant ethernet ring: o-ring (recovery time < 10ms over 250 units of connection) ? open-ring supports the other vendor's ring technology in open architecture ? o-chain support the multiple redundant ring technology ? provides fast recovery technology for ethernet multi-redundancy ? stp/rstp supported ? snmp v1/v2c/v3 support for secured network management ? supports lldp (link layer discovery protocol) ? configurable by web-based and windows utility (open-vision) ? event notification through syslog, email, and snmp trap ? two 100base-fx fiber port support for long distance connection ? four p.s.e. ports based on ieee 802.3af standard C up to 25 watts per port ? rigid ip-30 housing design ? din-rail and wall mounting enabled ips-2042tx/2042fx series are lite-managed redundant ring ethernet switches with 4x10/100base-t(x) ports with poe p.s.e. function and 2x10/100base- t(x) or 2x100base-fx fiber ports. ips series support power over ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an ethernet network. each ips switches has 4x10/100base-t(x) p.s.e. (power sourcing equipment) ports. p.s.e. is a device (switch or hub for instance) that will provide power in a poe setup. with complete support of ethernet redundancy protocol, o-ring (recovery time < 10ms over 250 units of connection) and open-ring, o-chain and stp/rstp(ieee802.1w/d) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. ips-2042tx / 2042fx series can be managed centralized and convenient by a powerful windows utility open-vision. the wide operating temperature range from -40 to 70c can satisfy most of operating environment. therefore, the switch is one of the most reliable choice for easy managed and fiber ethernet application. introduction features network connection topology view oring's switches are intelligent switches. being different from other traditional redundant switches, oring provides a set of windows utility (open-vision) for user to manage and monitor all of industrial ethernet switches on the industrial network. open-vision industrial ethernet switch din-rail lite-managed fast poe ethernet switch monitoring and configuration interface v1.51 / dec, 2011 ips-2042tx/ ips-2042fx series industria l media converte r industria l device server industrial wireless access point industrial cellular vpn router industrial m2m gateway network m anagement softwar e accessorie s industria l ethernet switch
1 industrial ethernet switch www.oring-networking.com 1-388 dimensions (unit=mm) oring switch model ips-2042tx ips-2042fx-mm-sc IPS-2042FX-SS-SC physical ports 10/100base-t(x) ports in rj45 auto mdi/mdix with p.s.e. 4 4 4 10/100base-t(x) ports in rj45 auto mdi/mdix without p.s.e. 2 - - fiber ports specifcations fiber ports number - 2 2 fiber ports standard - 100base-fx 100base-fx fiber mode - multi-mode single-mode fiber diameter (m) - 62.5/125 m 50/125 m 9/125 m fiber optical connector - sc sc typical distance (km) - 2 km 30 km wavelength (nm) - 1310 nm 1310 nm max. output optical power (dbm) - -14 dbm -8 dbm min. output optical power (dbm) - -23.5 dbm -15 dbm max. input optical power (saturation) - 0 dbm 0 dbm min. input optical power (sensitivity) - -31 dbm -34 dbm link budget (db) - 7.5 db 19 db specifcations industrial ethernet switch din-rail lite-managed fast poe ethernet switch poe pin defnition v1.51 / dec, 2011 rj-45 pin defnition pin no. description #5 poe power input + #6 rd- #7 poe power input - #8 poe power input - rj-45 pin defnition pin no. description #1 td+ #2 td- #3 rd+ #4 poe power input +
1-389 1-389 designed for rugged excellence technology ethernet standards ieee 802.3 for 10base-t ieee 802.3u for 100base-tx and 100base-fx ieee 802.3x for flow control ieee 802.1d for stp (spanning tree protocol) ieee 802.1w for rstp (rapid spanning tree protocol) ieee 802.1ab for lldp (link layer discovery protocol) ieee 802.3af poe specification (up to 25 watts per port for p.s.e.) mac table 1024 mac addresses priority queues 4 processing store-and-forward switch properties switching bandwidth : 1.2gbps vlan : port based security features enable/disable ports vlan to segregate and secure network traffic software features stp/rstp (ieee 802.1d/w) redundant ring (o-ring) with recovery time less than 10ms over 250 units open-ring support the other vendor's ring technology in open architecture port configuration, status, statistics, monitoring, security dhcp client network redundancy o-ring open-ring o-chain fast recovery stp rstp led indicators power indicator green : power led x 3, green : poe led x 4 r.m. indicator green : indicates that the system is operating in o-ring master mode o-ring indicator green : indicates that the system is operating in o-ring mode fault indicator amber : indicates unexpected event occurred 10/100base-t(x) rj45 port indicator green for port link/act. amber for link fiber port indicator green for port link/act. amber for link fault contact relay relay output to carry capacity of 1a at 24vdc power redundant input power triple dc inputs. 2x48vdc on 7-pin terminal block , 1x48vdc on power jack power consumption (typ.) 5 watts 7 watts 7 watts overload current protection present reverse polarity protection present on terminal block physical characteristics enclosure ip-30 dimensions (w x d x h) 54.2(w) x 106.1(d) x 145.4(h) mm (2.13x4.18x5.72 inch.) weight (g) 696 g 709 g 709 g environmental storage temperature -40 to 85c (-40 to 185f) operating temperature -40 to 70c (-40 to 158f) operating humidity 5% to 95% non-condensing industrial ethernet switch din-rail lite-managed fast poe ethernet switch v1.51 / dec, 2011 industria l media converte r industria l device server industrial wireless access point industrial cellular vpn router industrial m2m gateway network m anagement softwar e accessorie s industria l ethernet switch
1 industrial ethernet switch www.oring-networking.com 1-390 available model model name description ips-2042tx industrial 6-port lite-managed poe ethernet switch with 4x10/100base-t(x) p.s.e. and 2x10/100base-t(x) ips-2042fx-mm-sc industrial 6-port lite-managed poe ethernet switch with 4x10/100base-t(x) p.s.e. and 2x100base-fx, multi-mode, 2km/1310nm, sc connector IPS-2042FX-SS-SC industrial 6-port lite-managed poe ethernet switch with 4x10/100base-t(x) p.s.e. and 2x100base-fx, single-mode, 30km/1310nm, sc connector packing list ? ips-204tx/2042fx ? din-rail kit ? wall-mount kit ? oring tool cd ? quick installation guide optional accessories (can be purchased separately) ? open-vision m500, powerful network management windows utility suite, 500 ip devices ? dr-75-48, 75w din-rail power supply ? dr-120-48, 120w din-rail power supply ? sdr-240-48, 240w din-rail power supply ? sdr-480-48, 480w din-rail power supply ? paa-482500, 48vdc/2500ma 120w power adapter with universal 100 to 240vac input, us power cord ? pae-482500, 48vdc/2500ma 120w power adapter with universal 100 to 240vac input, eu power cord ips-2 aa b cc - dd - ee ordering information code defnition 10/100base-t(x) p.s.e. port number additional port number additional port type fiber optical mode fiber optical connector option - 04: 4 ports - 2: 2 ports - fx: 100base-fx - tx: 10/100base-t(x) - mm: multi-mode - ss: single-mode - sc: sc connector industrial ethernet switch din-rail lite-managed fast poe ethernet switch regulatory approvals emi fcc part 15, cispr (en55022) class a ems en61000-4-2 (esd), en61000-4-3 (rs), en61000-4-4 (eft), en61000-4-5 (surge), en61000-4-6 (cs), en61000-4-8, en61000-4-11 shock iec60068-2-27 free fall iec60068-2-32 vibration iec60068-2-6 safety en60950-1 mtbf (hours) (mil-hdbk-217f2, gb, gc, 25c ) 304,333 292,673 292,673 warranty 5 years v1.51 / dec, 2011
|
